Pocket
Solutions have released a nice leather case for the XDA Atom and HP Ipaq
rw6828 and were happy to send me one for me to review.
The
Pocket Solutions Case has the following
features:
- Two Mini SD Card Pockets
- Money Pouch
- Cut-outs for all buttons and the Status
LED
- Cut-outs for the camera lens and LED
flash
- Cut-outs for easy access to the Reset
hole and Mini USB Connector
- Removable and rotating Belt Clip
This case is imported from Turkey, and has
been well crafted from leather. The stitching is neat and appears fairly
strong giving me the impression that this case should last well.
The front flap is nice and stiff to help
protect the fragile screen of the XDA Atom / HP rw6828 and is held closed by a
pair of small magnets. These magnets hold the flap closed firmly while
still allowing it to be opened easily.
My Atom fitted inside this case perfectly, and
all buttons, USB connector, reset hole, audio socket and camera were accessible
through the punched out access holes in the case.
The belt clip looks and feels nice and strong.
To clip the case on the belt clip, the case must first be rotated 90 degrees (in
the direction of your belt) and then pushed down until it clicks in place.
Once locked there, the case is free to swivel which aids in keeping the Atom out
of the way. To remove the case from the belt clip, the case needs to be
rotated 90 degrees again and the release button pressed before the case will
unclip in an upward direction. I really liked this simple method to help
prevent the case accidentally being unclipped from your belt. It takes a
conscious effort to remove the case from your belt.
Although this is a nice case, the vinyl
material used to back the leather pouch seems a bit tacky. They needed to
build in strength as the leather used is very thin, but I would have liked to
see something other than a vinyl material.
I have included some more photos of this nice
case below.
|

Pocket Solutions Case |

Case with Atom |
|

Left Hand Side -
Showing volume
button access |

Right Hand Side
- Showing record and camera
button access
|
|

Rear
- Showing Camera Lens,
LED Flash and Clip
|

Front
- Showing its neat finish
|
Overall, the Pocket Solutions Signature Series
Case is a nice product designed to help protect your phone and keep it in a
handy position on your belt. Have a look at the
Pocket Solutions web site for pricing and a fast growing list of other
cases.
| Pocket Solutions
Signature Series Leather Case
Scores a Very Good 9/10 |
|